Engineering Center

On behalf of customer: We would like to fasten to concrete that has an operating temperature of 90 degrees C. Do you have a product that can accommodate this level of high constant temperature?

2 pcs of anchor to be tested at Tampines Ave 5

Just want to enquire How much the pull out test,

hello there, is there is possible to insert more than one load on the program for example, I want to insert more than one tension load

Client requesting for anchor rod sized M12 x 200mm, what size of HVU2 Adhesive capsule can I offer? M12 adhesive is only available up to 110mm. Area of installation is for new chemical fibre tank footing bracket.

What is the thickness of countersunk head for all types of HUS 4

Our client wishes to remove and re-fit a bracket secured with HST-3 M10 anchors. Can this be safely done without fully removing the anchor or impairing the performance of the anchor? It is a safety critical installation.

why do mechanical anchors such as HST3 and HSA have fixed embedment depth in ACI, but can vary in ETA?

I did try to run to Profis Software the maximum tension Capacity of M10 rebar with HIT RE500v3 at 50mm embedment, however it is prompting that this is outside values (minimum is 60mm). However, since the connection would be an overlay (slab), this might need a different approach as compared to what I did previously. With that,...

There is no HSA anchor bolt are not in the selection to design the anchor