Engineering Center

Posted by Chee Loong KOHover 4 years ago

Integration Among software

We understand that Tekla Structure has been integrated with Profis Engineering. Appreciate it if you will integrate Tekla Tedds with Profis engineering too.

Tedds,Profis Engineering

Posted by ISMAIL5353over 4 years ago

Bond-Splitting Behaviour of Post-Installed Rebar: Part 1 of 2 - Malaysia Audience MONDAY, MARCH 14 2022 AT 10:00 AM ( 08)rtificate

I have not received the attendance certificate.

certificate,certificate .. I've check the list in my Hilti user account.

Posted by ILSover 4 years ago

STAAD IMPORT USING STAAD HILTI INTERFACE

STAAD HILTI Interface tool detects the model, but after running the model & selecting the nodes & load combinations , the import tool is not detecting the nodes & load combinations.

STAAD PRO,HILTI INTERFACE

Posted by Sanjoy Royover 4 years ago

The chemical volume (RE 500 V3) for bolt having 80 mm dia with 2500 mm embedment depth

What will be the volume of the consumption of this chemical if a bolt with dia 80mm and depth 2500 is required to be fixed? the hole dia is 125 mm. most importantly, is it safe to transfer load for this large dia? the anchor is not Hilti anchor.

Chemical Anchors,volume,calculation

Posted by Hilti Employee (famihan)over 4 years ago

ANCHOR CHANNEL BASIS FOR PULL OUT TEST

May I verify if what is the basis of our Anchor Channel Pull Out Test at Site

Cast In Anchor Channel,Pull Out Test

Posted by Arjohn Espinoover 4 years ago

ASTM C780 Approval for HIT-RE 10

Asking in behalf of the customer: Does HIT RE-10 have approval for ASTM C780 Standard Test Method for Mortars in Plain and Reinforced Unit Masonry? Where are we able to view the results of the test

HIT-RE 10,ASTM C780

Posted by Sanjoy Royover 4 years ago

What is the NRC value of CP 606? What thickness of sealant is required to achieve NRC value of 0.8

To achieve some acoustic parameters, an NRC value of 0.8 is required in a sealant, in this case, can we use CP 060? what will be the NRC value and how much thickness is required to achieve an NRC value of 0.8. Provide any document other than the attachment.

cp606,NRC,noise,Sealant

Posted by Philip Adrien Woodsover 4 years ago

Self Galvanizing of Zinc Coated Rods

Asking in behalf of the customer: Due to longer lead time of HAS-U HDG anchors, customer is proposing to purchase a normal HAS-U instead of HDG, then they would be the one to have it galvanized. Please share your thoughts on this.

corrosion,Hot Dipped Galvanized

Posted by Mahalakshmi Shankarover 4 years ago

Anchorage for rebar in existing and new concrete

Should the shear connectors be provided with full anchorage? Can someone share HILTI Rebar fastening manual B2.2?

Embedment,Post Installed rebar,shear connectors

Posted by Mahalakshmi Shankarover 4 years ago

Post installed rebar shape

Can we have an L shaped post installed rebar? say for example I need to tie in a top horizontal bar of new overlay to an existing layer of footing below?

any suggestions on tying the top flexure bar of overlaid concrete to the existing pile cap using adhesive anchoring?,anchorage length of interface shear dowels for monolithic action inside existing and new concrete

Showing 131-140 of 166 Results