Standard fixings for support systems
Standard fixation elements for modular support systems – clips, couplers, clamps, threaded rods, air duct fasteners, bolts, nuts, screws and more
38 Products
Filter
- Description
- Galvanised pre-cut lengths of threaded rod with 4.6 steel grade
- Material composition
- Steel grade 4.6
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Galvanised threaded rod with 4.8 steel grade
- Fire resistance (yes/no)
- No
- Material composition
- Steel grade 4.8 - DIN 976-1
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Hot-dip galvanised (HDG) threaded rod with 4.8 steel grade
- Material composition
- Steel grade 4.8
- Surface finish
- Hot-dip galvanized
- Base material type
- n/a
- Description
- Galvanised threaded pipe with 4.6 steel grade used as an accessory for various applications
- Material composition
- Steel grade 4.6
- Surface finish
- Indoor Coated - Electro galvanised
- Base material type
- n/a
- Description
- Galvanised flat washer corresponding to ISO 7089
- Material composition
- Steel - DIN EN ISO 7089
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Galvanised flat washer similar to ISO 7089
- Material composition
- Steel
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Hot-dip galvanised (HDG) flat washer corresponding to ISO 7089
- Material composition
- Steel - DIN EN ISO 7089
- Surface finish
- Outdoor Coated - HDG
- Load range
- Light-duty
- Description
- Stainless steel (A2) flat washer corresponding to ISO 7089
- Required material grade
- A2
- Material composition
- Stainless steel A2 – DIN EN ISO 7089
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Stainless steel (A4) flat washer corresponding to ISO 7089
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4 – DIN EN ISO 7089
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Stainless steel (A4) flat washer similar to ISO 7089 used in various applications
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Galvanised flat washer corresponding to ISO 7093 used in various applications
- Material composition
- Steel - DIN EN ISO 7093-1
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Hot-dip galvanised (HDG) flat washer corresponding to ISO 7093 used in various applications
- Material composition
- Steel - DIN EN ISO 7093-1
- Surface finish
- Outdoor Coated - HDG
- Load range
- Light-duty
- Description
- Stainless steel (A4) flat washer corresponding to ISO 7093 used in various applications
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4 – DIN EN ISO 7093-1
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Galvanised grade 8 hexagon nut corresponding to DIN 934
- Material composition
- Steel grade 8
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Medium-duty
- Description
- Hot-dip galvanised (HDG) grade 8 hexagon nut corresponding to DIN 934
- Material composition
- Steel grade 8
- Surface finish
- Outdoor Coated - HDG
- Base material type
- n/a
- Description
- Stainless steel (A2) hexagon nut corresponding to DIN 934
- Required material grade
- A2
- Material composition
- Stainless steel A2-70
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Stainless steel (A4) hexagon nut corresponding to DIN 934
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4-70
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Hot-dip galvanised (HDG) prevailing torque hexagon nut with self-locking mechanism for use outdoors
- Material composition
- Steel grade 8
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) prevailing torque hexagon nut with self-locking mechanism for use outdoors
- Material composition
- Steel grade 8
- Surface finish
- Outdoor Coated - HDG Plus
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) coupling nut for extending threaded rods
- Material composition
- Steel grade 4.6
- Surface finish
- Outdoor Coated - HDG
- Base material type
- n/a
- Description
- Stainless steel (A4) coupling nut for extending threaded rods
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4-70
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Galvanised hexagonal coupling nut for extending threaded rods
- Material composition
- Steel
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Galvanised hexagon screw corresponding to DIN 933
- Material composition
- Steel grade 8.8
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Medium-duty
- Description
- Hot-dip galvanised (HDG) hexagon screw corresponding to DIN 933
- Material composition
- Steel grade 8.8
- Surface finish
- Outdoor Coated - HDG
- Load range
- Medium-duty
- Description
- Stainless steel (A4) hexagon screw corresponding to DIN 933
- Required material grade
- A4
- Material composition
- Stainless steel A4-70 - DIN EN ISO 3506-1
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Hot-dip galvanised (HDG) hexagon screw corresponding to DIN 933
- Material composition
- Steel grade 8.8
- Surface finish
- Outdoor Coated - HDG
- Load range
- Light-duty
- Description
- hot-dip galvanised (HDG) hexagon bolt corresponding to DIN 931
- Material composition
- Steel grade 8.8
- Surface finish
- Outdoor Coated - HDG
- Load range
- Medium-duty
- Description
- Hot-dip galvanised (HDG) pipe ring saddle adapter for converting the diameter of threaded rods
- Material composition
- 11 SMn 30 - DIN EN 10087
- Surface finish
- Outdoor Coated - HDG
- Base material type
- n/a
- Description
- Galvanised air duct bracket for fastening ventilation ducts directly to ceilings
- Noise reduction
- 16 dB (A)
- Material composition
- DD11 - DIN EN 10111, EPDM
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised air duct bracket for fastening or hanging ventilation ducts
- Noise reduction
- 12 dB (A)
- Material composition
- DD11 steel - DIN EN 10111, EPDM
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised air duct bracket for fastening light ventilation ducts overhead
- Noise reduction
- 18 dB (A)
- Material composition
- DD11 steel - DIN EN 10111, EPDM
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised air duct bracket for fastening medium ventilation ducts overhead
- Noise reduction
- 12 dB (A)
- Material composition
- DD11 steel - DIN EN 10111, EPDM
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised insulating connector/silencer for use with tensile loads
- Noise reduction
- 11 dB (A)
- Material composition
- DD11 - DIN EN 10111, EPDM
- Resistance
- Sunlight, weathering, environmental influences
- Description
- Galvanised silencer for various applications
- Noise reduction
- 18 dB (A)
- Material composition
- DD11 - DIN EN 10111, EPDM
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Flat washer for fastening pipe rings to strut trapeze, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Galvanised bored plate for fire-tested trapeze assembly and anchoring
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Hot-dip galvanised (HDG) bored plate for trapeze assembly and anchoring
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Stainless steel (A4) bored plate for trapeze assembly and anchoring
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)