Please note, the order volume has been updated. This is due to packaging and minimum order quantities.
Please note, the order volume has been updated to . This is due to packaging and minimum order quantities.
BX 3-BT extends combustion-free technology to fastening X-BT threaded studs, for a wide variety of grating, bonding and MEP applications.
Our BX 3-BT is combustion-free and entirely powered by your existing 22V Li-ion batteries.
This means no propellant cartridges to store and dispose, less paperwork and more accessibility for areas where powder tools might be restricted or require hot work permits.
Time savings can be huge compared to traditional methods, like welding, clamping and through-bolting.
Simply drill a small pilot hole, fasten the stud, and check the embedment depth. Drill, fasten, check for fastenings in less than 2 minutes.
As the BX 3-BT is battery-powered there are no powder cartridge "boosters", and so no powder residue to clean.
Therefore, you don't need the cleaning kits, sprays, lubricants and other accessories associated with DX tools and welding equipment.
BX 3-BT joins the growing number of Hilti tools that talk to you. Using the tool’s built-in Bluetooth® technology and the Hilti Connect App, you can track the number of fastenings, watch how-to videos, actively troubleshoot for routine maintenance, and even arrange a service or repair directly on the jobsite.
Limitations of traditional methods
Traditional methods for fastening on steel can be complicated, time-consuming and expensive:
The Hilti advantage
With Hilti X-BT blunt tip fastening you drive a stainless steel fastener into a pre-drilled hole in the steel. This means you maintain the corrosion protection, as there is no damage to the coating. Simply drill a pilot hole, fasten a stud and check the embedment. Drill, fasten, check for fastenings in less than 2 mins.
Unlike welding or through bolting, you do not need to prepare the base material or rework it afterwards. This makes the installation much faster, while providing reliable corrosion protection. Any trained operator can do the work, you do not need a certified welder. You also do not require access to both sides of the steel, like you do with through bolting or clamping, so no fingers in tight spaces.
Until recently, you could only drive the X-BT with a powder-actuated tool like a DX 351-BT. However, the new BX 3-BT is battery-powered, meaning no storing or disposing of powder cartridges and less hot work restrictions.
Compared to powder-actuated tools, the BX 3-BT is more comfortable to use thanks to lower compression force, noise and recoil. Plus, you can make up to 800 fastenings, with just a full charge of your existing Hilti 22V Li-ion batteries.
For reliable fastenings on coated steel, capable of lifting a Hilti truck!
Use with threaded studs to fastening grating and checker plate in highly corrosive environments.
Different fastener guides ideal for multi-purpose, electrical connections, grating and more.
Runs on the same 22V battery for predrilling accurate holes for X-BT threaded studs.
We have dedicated technical consultants who will meet you directly at the jobsite and offer solutions instantly. Our customer service agents offer advice, take orders, arrange deliveries and repairs all in just one phone call. Get instant access to our products at your nearest Hilti Store, where you can try out our tools and inserts and get further advice.