Inserts
Find specialised nut setters, stepped drill bits and other tool inserts you need when installing Hilti fasteners
27 Products
Filter
ultimate
- Description
- SDS Plus (TE-C) hammer drill stop bit for HKD-TE-CX long HKD setting tools
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete
- Working mode
- Hammer drilling
ultimate
- Description
- SDS Plus (TE-C) stop bit for HKD anchors
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete
- Working mode
- Hammer drilling
- Description
- Stop drill bit for HSC installation (TE-C)
- Connection end
- TE-C (SDS-plus)
- Working mode
- Drilling, Hammer drilling
- Base material
- Concrete, Reinforced concrete
- Description
- Stop drill bit – required for installation of HDA undercut anchors
- Connection end
- TE-C (SDS-plus)
- Working mode
- Drilling, Hammer drilling
- Base material
- Concrete
- Description
- Stop drill bit – required for installation of HDA undercut anchors
- Connection end
- TE-Y (SDS-max)
- Working mode
- Hammer drilling, Drilling
- Base material
- Concrete
- Base materials
- Carbon steel
- Application
- Fastening to steel
- For use with (tools)
- FX 3-A, FX 3-HT, SF 6, SF 6H, SF 8-M
- Description
- Stepped drill bit for predrilling accurate holes for X-BT fasteners
- Base materials
- Steel, Cast iron
- Minimum thickness of base material (steel)
- 8 mm
- Description
- Stepped drill bit for pre-drilling holes for new-generation X-BT fasteners
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 8 mm
- Base materials
- Metal
- Minimum thickness of base material (steel)
- 6 mm
- Length
- 65 mm
- Base materials
- Metal
- Minimum thickness of base material (steel)
- 6 mm
- Length
- 95 mm
- Description
- Ultimate SDS Plus (TE-C) hollow drill bit for virtually dust-free hammer drilling in concrete
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete
- Working mode
- Hammer drilling
- Description
- Ultimate SDS Max (TE-Y) hollow drill bit for virtually dust-free drilling in concrete
- Connection end
- TE-Y (SDS-max)
- Base material
- Reinforced concrete, Concrete
- Working mode
- Hammer drilling
- Description
- Customised screwdriver bits for Hilti screw fastening systems
- Feature
- Torsion bits, Impact bits
- Connection end
- Hexagonal
- Description
- Stepped drill bits for predrilling accurate holes or removing coatings for S-BT threaded screw-in studs on aluminum and steel
- Base materials
- Aluminium
- Description
- PFP removal drill bits for predrilling accurate holes and removing coatings from PFP coated steels
- Base materials
- Steel
- Hole diameter
- 31 mm
- Length
- 74 mm
- Description
- PFP removal drill bits for predrilling accurate holes and removing coatings from PFP coated steels
- Base materials
- Steel
- Hole diameter
- 31 mm
- Length
- 74 mm
- Description
- Bit holder and accessories for use with screw fastening inserts
- Feature
- Magnetic nutsetters, Standard bits
- Recess
- Hexagonal (Hex)
- Description
- Nut setter with magnetic screw retention for use with hex-head screws
- Feature
- Magnetic nutsetters
- Connection end
- 1/4 in hexagonal
- Description
- Nut setter with non-magnetic / ball-lock screw retention for use with hex-head screws
- Feature
- Mechanical nutsetters
- Connection end
- 1/4 in hexagonal
ultimate
- Description
- 3/8" (inch) short impact socket for tightening bolts and anchors
- Connection end
- 3/8 in square
- Short/long
- Short
- Material coating/plating/finish
- Black phosphate
ultimate
- Description
- 1/2" long impact socket for tightening bolts and anchors
- Connection end
- 1/2 in square
- Short/long
- Long
- Material coating/plating/finish
- Black phosphate
ultimate
- Description
- 1/2" (inch) short impact socket for tightening bolts and anchors
- Connection end
- 1/2 in square
- Short/long
- Short
- Material coating/plating/finish
- Black phosphate
- Description
- Accessory for impact sockets
- Connection end
- 3/8 in square, 3/4 in square, 1/4 in hexagonal, 7/16 in hexagonal
- Short/long
- Long
- Material coating/plating/finish
- Black phosphate
- Description
- Nut setter for tightening flange nuts on threaded studs
No technical data available
ultimate
- Description
- Torque-controlled socket wrench for setting HSA anchors
- Connection end
- 1/2 in square