SF 4-A22 Cordless drill driver
New product
Compact-class cordless 22V drill driver with brushless motor for when you need higher performance during light-duty tasks or in hard-to-reach places
- Maximum torque (soft/hard joint): 36 Nm (soft joint), 62 Nm (hard joint)
- No load RPM: gear 1: 610 rpm; gear 2: 2100 rpm
- Chuck clamping range: 2 - 13 mm
SGD 335.67
Power-class cordless 22V hammer drill driver with Active Torque Control and electronic clutch for universal use on wood, metal, masonry and other materials
- Maximum torque (soft/hard joint): 65 Nm (soft joint), 80 Nm (hard joint)
- No load RPM: gear 1: 490 rpm; gear 2: 2000 rpm
- Chuck clamping range: 2 - 13 mm
SGD 462.61
SF 2-A12 Cordless drill driver
New product
Subcompact-class 12V brushless drill driver for when you need access, low weight and high control
- Maximum torque (soft/hard joint): 21 Nm (soft joint), 34 Nm (hard joint)
- No load RPM: gear 1: 400 rpm; gear 2: 1600 rpm
- Chuck clamping range: 1 - 10 mm
SGD 163.15
SFD 2-A12 Cordless screwdriver
New product
Subcompact-class 12V brushless 1/4" hex drill driver for when you need compactness and fine torque control
- Maximum torque (soft/hard joint): 21 Nm (soft joint), 34 Nm (hard joint)
- No load RPM: gear 1: 400 rpm; gear 2: 1600 rpm
- Number of gears: 2
SGD 163.15
Compact cordless 22V drill driver operated by Li-ion battery with 13 mm keyless chuck for light- and medium-duty applications
- Maximum torque (soft/hard joint): 28 Nm (soft joint), 55 Nm (hard joint)
- No load RPM: gear 1: 600 rpm; gear 2: 1800 rpm
- Chuck clamping range: 2 - 13 mm
SGD 779.00
Ultimate class 22V cordless drill driver with four-speed gearing and secure chuck for reduced drill bit slippage and high performance in metal drilling applications
- Maximum torque (soft/hard joint): 50 Nm (soft joint), 84 Nm (hard joint)
- No load RPM: gear 1: 320 rpm; gear 2: 550 rpm; gear 3: 1250 rpm; gear 4: 2150 rpm
- Chuck clamping range: 2 - 13 mm
From
SGD 567.00
Ultimate class 22V cordless drill driver with Active Torque Control and four-speed gearing for high torque in demanding applications in wood and other materials
- Maximum torque (soft/hard joint): 72 Nm (soft joint), 120 Nm (hard joint)
- No load RPM: gear 1: 310 rpm; gear 2: 530 rpm; gear 3: 1210 rpm; gear 4: 2100 rpm
- Chuck clamping range: 2 - 13 mm
SGD 544.00
