Please note, the order volume has been updated. This is due to package and minimum order quantities.
Please note, the order volume has been updated to. This is due to package and minimum order quantities.
On 1st April 2015, Eurocode design standard has replaced British Standards as Singapore’s prescribed building codes for structural design. (BCA Newsroom)
Comprising of a series of 10 European Standards, they are considered one of the world’s most advanced structural design codes. This also means that there is now a specific set of codes that also addresses the design method post-installed rebar and anchors.
In EC2 Clause, it states that the design methods for post-installed rebar connections must follow EC2/Technical Report 023. And for post-installed anchors, the design must follow ETAG 001 Annex C. Thus, the design methods for the two applications are completely different.
Structural Rebar connections and extensions can be safely designed like cast-in connections utilizing the design provisions provided within Eurocode 2 and EOTA TR023
Design Steel Resistance,
NRd,s = NRk,s / ˠMs
Design Concrete Cone Resistance
NRd,c = (N0Rk,c / ˠMc) . (Ac,N / A0C,N) .
Ψs,N . Ψre,N . Ψec,N
Design Pull-out Resistance,
NRd,p NRd,c = (N0Rk,p / ˠMp) . (Ap,N / A0p,N) .
Ψs,Np . Ψg,Np . Ψec,Np . Ψre,Np . Ψc
Design Splitting Resistance,
NRd,sp NRd,c = (N0Rk,c / ˠMc) . (Ac,N / A0c,N).
Ψs,N . Ψre,N . Ψec,N . Ψh,sp
BS8539 is the code of practice for selection and installation of post-installed anchoring. It is also linked to the relevant European regulations, especially with respect to selecting products with the CORRECT European Technical Approval or Assessment’s (ETA) for the application.
Everyone; designers, specifiers, contractors, installers, testers, manufacturers and suppliers.
Structural connections with post-installed rebar
(e.g. extension/connection to walls, slabs, stairs, columns, foundations, etc.)
HIT-RE500 Epoxy Adhesive Anchor designed to meet the most stringent standards of the latest building codes.
Anchoring structural steel connections
(e.g. steel columns, beams, etc.)
HIT-HY200 -R achieves the highest bond strength of all adhesive mortar.
- Decoding Eurocode for Post-Installation
- ETAG 001 Annex C for Anchor Design (cracked or uncracked concrete)
- Seismic Design
To see account specific prices and content, please choose appropriate account.