Please note, the order volume has been updated. This is due to package and minimum order quantities.
Please note, the order volume has been updated to. This is due to package and minimum order quantities.
On 1st April 2015, Eurocode design standard has replaced British Standards as Singapore’s prescribed building codes for structural design. (BCA_Newsroom). This also means that there is now a specific set of codes that also addresses the design method post-installed rebar and anchors.
In EC2 Clause, it states that the design methods for post-installed rebar connections must follow EC2/Technical Report 023. And for post-installed anchors, the design must follow ETAG 001 Annex C . Thus, the design methods for the two applications are completely different:
Structural Rebar connections and extensions can be safely designed like cast-in connections utilizing the design provisions provided within Eurocode 2 and EOTA TR023
The European Technical Approval Guideline 001 “Metal Anchors for used in Concrete” sets out the basis for assessing anchors to be used in concrete.
|Mechanical Anchor Diameter Range||M6 - M24|
|Threaded Rod Diameter Range||M8 - M39|
|Rebar Diameter Range||M8 - M32|
BS8539 is the code of practice for selection and installation of post-installed anchoring. It is also linked to the relevant European regulations, especially with respect to selecting products with the CORRECT European Technical Approval or Assessment’s (ETA) for the application.
Everyone; designers, specifiers, contractors, installers, testers, manufacturers and suppliers.
Structural conections with post-installed rebar
(e.g. extension/connection to walls, slabs, stairs, columns, foundations, etc.)
HIT-RE500 Epoxy Adhesive Anchor designed to meet the most stringent standards of the latest building codes.
Anchoring structural steel connections
(e.g. steel columns, beams, etc.)
HIT-HY200-R achieves the highest bond strength of all adhesive mortar.
To see account specific prices and content, please choose appropriate account.